Page 16 ST 700 Series HART/DE Option User’s Manual Revision 4.0
5.3.3 General Configuration Parameters
Click the General button on the DEVICE MAIN MENU page, and configure parameters according
to Table 6.
Table 6 – General Configuration Parameters
Read (R) or
Read/Write (R/W)
Dual Range Smart Transmitter Digital Communications
(STDC) or Single Range or Single Range with
secondary variable (SV).
Analog, DE 4-byte, or DE 6-byte
Failsafe (FS) direction: upscale or downscale, switch
selectable on the electronics module. See the ST 700
SmartLine Transmitter User Manual, 34-ST-25-44 for
details.
Click the Back button to return to the DE MAIN MENU.
To Next Page
Loading...
