Page 12 ST 700 Series HART/DE Option User’s Manual Revision 4.0
5 DE Transmitter Configuration for
ST 700 Standard Transmitter
5.1 Configuration Personnel Requirements
The configuration processes in this section reflect the assumption that you will use the Honeywell
MC Toolkit Configuration Tool to configure an ST 700 Standard SmartLine Pressure Transmitter.
The MC Toolkit application is used to configure the Honeywell ST 3000 Pressure Transmitter, the
STT 3000 Smart Temperature Transmitters, as well as the ST 700 Standard SmartLine Pressure
Transmitter. Throughout, the term Transmitter means the ST 700 Standard SmartLine Pressure
Transmitter.
The other tools that support the DE Transmitter configuration are the SmartLine Configuration
Toolkit (SCT 3000), Experion PKS, and Smart Field Communicator (SFC).
5.2 MC Toolkit Software Application Overview
Each new ST 700 Standard SmartLine Pressure Transmitter is shipped from the factory with a basic
configuration installed. This basic configuration must be edited or revised to meet the requirements of
your process system.
The MC Toolkit application supports both online and offline configuration.
Online operation allows you to establish communication with a DE Transmitter for the
following tasks:
o Upload a Transmitter database.
o Configure Transmitter parameters.
o Calibrate a Transmitter.
o Execute diagnostics.
o Save a configuration to a file.
Offline operation allows you to click a basic template, edit the parameters and download to a
Transmitter after establishing communication with it. Parameter updates can also be saved in
a file without actually downloading them to a Transmitter.
Specific operating details for the MC Toolkit displays are provided in Section 3.5, “MC Toolkit
Application Software Display Conventions,” of the MC Toolkit User Manual, Document # 34-ST-25-
20 (MCT202) or #34-ST-25-50 (MCT404), for the following:
Navigation
The MC Toolkit Menu Bar
File Menu
Modem Menu
Help Menu
Data Entry and Display
To Next Page
Loading...
