Honeywell ST 700 - 9 HART Advanced Diagnostics for ST 700 Standard Transmitter; About this Section; Advanced Diagnostics; Install Date

Revision 4.0 ST 700 Series HART/DE Option User’s Manual Page 75
9 HART Advanced Diagnostics for
ST 700 Standard Transmitter
9.1 About This Section
This section provides information about the Advanced Diagnostic features in the ST 700 Standard
SmartLine Pressure Transmitter.
9.2 Advanced Diagnostics
Table 15 – Viewing Advanced Diagnostics
What you want to view
What to do
 Install date
 PV (Process Variable) Tracking
Diagnostics
 SV (Meter Body Temperature
)Tracking Diagnostics
 TV (Static Pressure) Tracking
Diagnostics (DP transmitters only)
 ET (Electronics Temperature) Tracking
Diagnostics
 Stress Life
 Service Life
 Operating Voltage Tracking
Diagnostics
 AVDD (Sensor Supply Voltage)
Tracking Diagnostics
 Sensor CPU Temp. Tracking
 Power Up Diagnostics
Click Start/FDC to Launch the FDC
application on the MC Toolkit.
On the homepage, click Online and establish
connection with the device.
Click My Device\Diagnostics\Adv
Diagnostics.
9.2.1 Install Date
Install Date
Parameter
Description
Date of device installation. Date displayed in
mm/dd/yyyy format where mm=month, dd=day,
yyyy=year
Set-up
User enters a date once during device lifetime. Once
date is entered no further updates are possible and
value becomes read only and is permanently saved.