Revision 4.0 ST 700 Series HART/DE Option User’s Manual Page 21
5.3.6 Monitor Status Configuration
With the DE MAIN MENU displayed, click the Monitor button. The MONITOR box will be
displayed.
MONITOR status parameters are R (read-only); Table 9 lists the status parameters.
Table 9 – Monitor Parameters
Read (R) or
Read/Write (R/W)
Loop output as a percent of Span
Secondary Variable in SV EU
Gross Transmitter Status. Click the Monitor menu
Device Status button to display device status.
Refer to the Messages and Diagnostic Codes section
of the MCT404/202 Toolkit manual.
Click the Back button to return to the DE MAIN MENU.
To Next Page
Loading...
