46 Basic configuration
4 - CONFIGURATION
Figure 21 Naming the thermostat
3. Tap on the text field
A keyboard will be displayed on the screen to enter the device name.
4. Enter the device name.
Assign a unique name to a thermostat specifying a name to the location where
the thermostat is installed. It assists the user to easily identify the device during
remote operation of the thermostat.
5. Tap the back button to navigate back to the previous screen and save the settings.
To configure Date & Time
The date and time of the thermostat is must be set manually. You can configure the
Date & time and Daylight savings.
1. Swipe left from the Home screen.
2. On the Quick access screen, tap > Basic > Date and Time.
The Date & Time screen appears.
Figure 22 Date & Time
3. Tap the date to set the today’s date.
4. Slide the Display toggle button to the right to set the 24h time format if required.
To Next Page
Loading...
Need help?
General
