5 - 11
Tethered Scanner (COM1)
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
Tethered Scanner (COM2)
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
Note: By default, COM1 and COM2 are enabled as scanner ports. To use the COM port for another use (such as
screen blanking), set the Enable Scanner Port to Off for the desired port.
Note: Symbology configuration is supported on Intermec scanners. For all other scanners use the bar codes
provided in the scanner manuals to program the symbologies.
Note: Do not select ASCII as the scanner model for an Intermec scanner or the ability to configure the symbology
settings with Enterprise Settings is lost.
Bluetooth Scanners
BT-Configure on Connect Auto-configure on connect:
• Overwrite with computer settings
• Keep scanner settings
Bluetooth Parameters
Power • Off
• On (default)
Discoverable • Disable (default)
• Enable
Connectable • Disable
• Enable (default)
Class of Device Hardware information (no user entry)
IBT Hardware information (no user entry)
Radio Hardware information (no user entry)
Device Address Hardware information (no user entry)
Applications Parameters
Launcher • Program Version
• Application Launch Buttons
» Caption text Color
» Application Button 1 - 21
• Background Image
• Single Application Auto Start
• Restricted File Browser
• Default Password
• Advanced Options
Enterprise Browser Program Version
Browser Engine
General
Menu Options
Security
Privacy
Appearance
Menu and Toolbar Actions