5 - 25
Auto-On Behavior
When the Auto-On power scheme/plan is selected and external power is present the Thor VM3 behaves as
described below. If external power is not present, refer to the UPS (page 5-26) section for Thor VM3 behavior.
Thor VM3 is Off
Conditions
The Thor VM3 is Off and gets external power, such as
• Thor VM3 is installed on a powered Smart Dock with the dock power switch On
• Thor VM3 is already mounted to a dock and external power is applied to the dock
• Thor VM3 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM3 boots. Once booted the Thor VM3 follows the Auto-On power scheme/plan with timers
reset after the boot completes.
Thor VM3 is On
Conditions
The Thor VM3 is On and gets external power, such as
• Thor VM3 is installed on a powered Smart Dock with the dock power switch On
• Thor VM3 is already mounted to a dock and external power is applied to the dock
• Thor VM3 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM3 continues to run and follows Auto-On power scheme/plan with timers reset at the time
power was connected.