Honeywell Vocollect A700 Series User Manual

Registry Key Default Value Description
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Decoding Security] - Decoding Verification
CenterDecoding 0x0
Only decodes a bar code if it is in
the center of the frame.
CenterDecodingTolerance 0x0
Amount of tolerance for what is
considered the "center". Range is
0x0 - 0x64 (0 to 100), where "0x0"
is the least tolerant (must be aimed
exactly).
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Imager] - Imager Configuration
DecodeMode 0x1
Decoding mode, where 0 = linear
imager emulation, and 1 = 2D
imager.
AimerFlashing 0x1
Aimer mode, where 0 = on, 1 =
decode optimized (flashing at
frame rate), and 2 = off.
Initial1DSearchArea 0x0
For 1D bar codes, sets the initial
search area. 0 = center, 1 = upper
half, 2 = lower half, 3 = full, 4 =
"smart raster" (better for non-
horizontal).
DPMMode 0x0
Enhances the ability to read a
DPM (Direct Product Marking) bar
code where the bar code is marked
directly on the product.
Damaged1DCodes 0x0
Enhances the ability to read
damaged or badly printed 1D bar
codes.
ExtensiveBarcodeSearch 0x0
The decoding algorithms spend
more time trying to find a bar code.
A700x Product Guide 106

Honeywell Vocollect A700 Series Specifications

General

Brand	Honeywell
Model	Vocollect A700 Series
Category	Measuring Instruments
Language	English