Disconnect the training device and begin your task by pressing the Play/Pause
button.
Training through VoiceConsole's Display
You can view the words the device asks you to train on a computer screen,
through the user interface, or pocket PC device screen as you go through the
training process. See Viewing Dialog Between a Device and an Operator in the
VoiceConsole online help for more information.
NOTE
This feature is supported using VoiceConsole 3.0 or newer with VoiceClient
3.5 and newer and VoiceCatalyst MP 1.0 and newer.
Training Using a Printed List of Words
If you suspect operators may have a difficult time recognizing the words the
device is speaking during training, you can create a print out of the words used
in the task that the device will ask the operators to train.
NOTE
This method is supported when using VoiceConsole 3.1 or newer.
1. If a current operator has previously performed the task the new operator is
going to use, go to VoiceConsole and perform the steps for viewing an
operator’s voice templates using the current operator. See Managing
Operator Numbers in the VoiceConsole online help for more information.
2. On the Manage Operator Templates:<operator name> page in VoiceConsole,
print the list of trained words. See Viewing Printable Versions of List Data in
the VoiceConsole online help.
3. If necessary, on the printed list, circle commonly misheard or confusing
words.
Printed List with Commonly Misheard or Confusing Words Circled
111 A700x Product Guide
To Next Page
Loading...
Need help?
General
