NOTE
You can exit this menu without changing the settings by pressing the
Play/Pause button before you press the Operator button.
5. When the voice is speaking as quickly or as slowly as you want, press the
Operator button to save the new speed setting.
Changing the Speaker's Gender on A700
Make sure the device is on or sleeping. The device should have a solid green
ring segment (on) or a rotating green ring (sleeping)
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until it says, "Change speaker."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the
sixth menu item in the list.
4. Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This
is male" to indicate the male voice.
NOTE
You can exit this menu without changing the settings by pressing the
Play/Pause button before you press the Operator button.
5. When you hear the speaker you want to use, press the Operator button to
select that speaker.
Understanding Talkman Commands
The Talkman device prompts the operator for responses that are specific to the
voice-directed work he or she is performing. Several basic Talkman commands,
however, can be spoken by the operator at almost any time while using the
device.
Spoken Com-
mand
You want to...
"Say again" hear the current prompt again
"Talkman sleep" put the device in sleep mode
"Talkman wake up" wake up the device
A700x Product Guide 26
To Next Page
Loading...
Need help?
General
