Talkman 6-Bay Device Charger
l The A700 6-bay device charger can charge up to 6 Talkman devices at one
time without having to remove the batteries.
l Refer to the Charging a Battery in a Talkman Device topic for more
information.
l The Talkman device charger is designed to be placed on a desktop or
mounted on a wall using a DIN rail. Customer with multiple chargers must
allow the required space between wall mounted units and must avoid
stacking desktop units on top of each other.
NOTE
Do not place a device into a charger without a battery attached to it.
A device that has been on and in use for more than eight hours will
automatically power off and then back on after it has been in the charger for
five minutes. Also, a device that has been in a charger for more than eight hours
will automatically power off and then back on.
Talkman Battery Charger
l The A700 12-bay battery charger can charge up to 12 batteries at one time.
l The LED indicator light on the charger front panel indicates if the charger is
powered on or not.
l Each battery port has LED lights that indicate battery charge status and
battery health.
l Refer to the Charging a Talkman Battery topic for more information.
l The battery charger is designed to be placed on a desktop or mounted on a
wall using a DIN rail. Customer with multiple chargers must allow the
required space between wall mounted units and must avoid stacking
desktop units on top of each other.
l Charger firmware can be updated using the Honeywell Accessory Update
Utility.
A700x Product Guide 34
To Next Page
Loading...
Need help?
General
