Make sure the battery is firmly in place and can't be removed without pressing
the battery release button.
WARNING
Replace a battery only with another battery that has been authorized by
Honeywell for the product you are using. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or other hazard. See also
Honeywell Battery Safety
>Removing a Battery from a Talkman A700/A700x
Device
Make sure the Talkman device is off.
CAUTION
Do not remove the battery until the LED indicator is off. If you remove the
battery when the device is on or sleeping, any data collected could be lost.
1. Hold the device in one hand.
2. Press the battery release button all the way down until the top of the battery
pops out from the battery compartment.
3. Lift the battery out of the compartment.
Battery Warm-Up Time
If a battery has been used in a cold environment, it will not begin charging until
it warms up sufficiently.
Temperature of battery use Approximate warm-up time
-4°C (24.8°F) 6 minutes
13 A700x Product Guide
To Next Page
Loading...
Need help?
General
