Honeywell XENON 1900 User Manual

114 Xenon/Granit User Guide
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If
you scan the Beep on BEL On bar code below, the scanner will beep every time a
BEL character is received from the host. Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger
Click On bar code below. Scan the Trigger Click Off code if you don’t wish to hear
the click. (This feature has no effect on serial or automatic triggering.) Default =
Trigger Click Off.
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this
option off only turns off the beeper response to a good read indication. All error and
menu beeps are still audible. Default = Beeper - Good Read On.
*Beep on BEL Off
Beep on BEL On
*Trigger Click Off
Trigger Click On
Beeper - Good Read Off
* Beeper - Good Read On

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g