Honeywell XENON 1900 User Manual

Xenon/Granit User Guide 115
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a
good read. Default = High for Granit/Xenon, Low for Xenon HC.
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scanner emits
on a good read. The Medium pitch differs for the Xenon and Granit scanners.
Default = Medium.
Vibrate – Good Read
Note: Vibration settings apply only to Granit Devices.
* Low
Medium
* High
Off
Low (1600 Hz)
* Medium - Xenon
(2700 Hz)
* Medium - Granit
(3200 Hz)
High (4200 Hz)

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g