ALPHABETIC REFERENCE XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 48
Note that the 'Add Template', 'Delete Template', and 'Modify
Template' items do not display for level-1 operators, and 'Template
Search' appears only if there are defined templates. If there are no
defined templates, only the 'Add Template' item displays for higher-
level operators so they can define templates.
Descriptions of each menu item follow.
User Address This option provides a list of available points that you can
select to display point description and modify point attributes.
Example:
User Address
Exhaust_fan 1 ▲
▲▲
▲
Hall_main_lights On ■
Main_water_meter 000 m3 1
Conf_room_temp 23 °C ■
▼
You can select one of these points to view and modify its
attributes. See section "Selecting Points by User Address"
(page 53) for details. Note that the following options provide
specific modification functions that are not available via the
User address function.
Manual Operation
Accumul. Runtime
Points in Trend
Suppress Alarm
These options provide a list of points related to the option. For
example, if you select 'Accumul. Runtime', all the points that
have accumulated runtime enabled appear on the screen with
their accumulated hours. Example:
Accumulated Runtime
Supply fan 1267 ▲
▲▲
▲
Exhaust fan 1257 ■
Burner 476 1
Htg. zone pump 736 ■
Cafe. hood 123 ▼
Each option displays a different screen with a specific function.
See the relevant sections for details:
Manual
Operation Change from manual to automatic operation
Accumul.
Runtime List accumulated runtime
Points in Trend Disable a point from trend log
Suppress Alarm (Un)suppress a point’s alarm reporting
To make other changes (for example, to change from
automatic to manual), select the point via the user address,
template search, or type search option.
The Type Selection option provides a list of point types:
To Next Page
Loading...
