ALPHABETIC REFERENCE XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 50
Htg_zone_pump_1
Status : On
Operating Mode: AUTO
Trend Logging : OFF
Back Next
Htg_zone_pump_1
Technical Address : 010205
Accumulated Runtime : 12736 h
Service Interval : 500 h
Hours Since Serviced: 500 h
Back Next
Htg_zone_pump_1
Normally Closed: Yes
Last Changed : 15:36 19.07.1993
Cycle Count : 656
Suppress Alarm : NO
Back
ANALOG INPUT POINT DESCRIPTION
Conf_Rm_Setpt
Value : 70 F
Operating Mode: AUTO
Back Next
Conf_Rm_Setpt
Technical Address: 010306
Alarm Stat. Chngd: 16:23 23.07.1993
Suppress Alarm : NO
Back Next
Low Alarm Limit : 60.0 F
Low Warning Limit : 54.0 F
High Warning Limit: 74.0 F
High Alarm Limit : 80.0 F
Alarm Hysteresis : 1.0 F
Back Next
Conf_Rm_Setpt
Sensor Offset : 0.0 F
Trend Logging : OFF
Trend Hysteresis : 1.0 Pct
Trend Cycle : 0 min
Back
The engineering units that display for the values in the examples are degrees
Fahrenheit. If a point is programmed for metric engineering units, the metric units
display.
To Next Page
Loading...
