Accessing
the
Logic Analyzer File System
This
chapter
shows you how to:
• Mount
the
file system via NFS.
• Access
the
file system via ftp.
This
chapter
assumes
that
the
logic
analyzer
is
physically connected to your
local
area
network. If it
is
not connected, refer
to
Chapter
1 for information
on
how
to
connectthe
system.
Control
User
vs.
Data
User
You
can access the logic analyzer file system as either the control user
or
a
data
user.
Control
User
• The control user can send programming commands.
• The control user has
read
and write access
to
the
file system.
• There
can
only be one control
user
at
any time.
Data
User
• The
data
user
cannot send programming commands.
• The
data
user
has
read
access to
the
entire file system,
but
can only
write
to
\system\disk\hard
and
\system\disk\flexible
directories (the logic analyzer disk drives).
• Multiple
data
users can access
the
logic analyzer simultaneously.
Password
and
File
Protection
There is
no
password protection built into the logic analyzer. This
means
that
files are
not
protected
against either deletion
or
being
written over.
2-2
To Next Page
Loading...
Need help?
General
