HP 1670A Series - Using Mouse and Keyboard for X Window; Duplicate Front-Panel Knob Control

Using the X Window Interlace
This chapter shows you how to:
• Start the interface.
• Close the interface.
• Load the custom fonts.
Using the Mouse and Keyboard
Once you have started the X Window interface and are displaying it on
your computer running the X server, you can use your computer's
keyboard and mouse to control the logic analyzer interface in the
same way you use the logic analyzer's keyboard and mouse. Refer to
your logic analyzer's User's Guide for a complete description of
keyboard and mouse operation.
Duplicating Front-Panel Knob Control
To duplicate turning the knob, hold down the right mouse button, and
move the mouse up or to the right for clockwise knob movement;
move the mouse down or to the left for counter-clockwise knob
movement.
You can also use the keyboard's Shift-up or -right arrow keys to
duplicate clockwise knob movement. Use the Shift-down or-left
arrow keys to duplicate counter-clockwise knob movement.
3-2