HP 1670A Series - Page 34

Example
Example
Using the X Window Interface
To close the interface
NFS method
If you have mounted the logic analyzer's file system to a directory named
I logic on your UNIX computer, enter the following command to close the
X Window interface:
echo 'xwin off' > /logic/system/program
If you are using a PC and the logical drive "L:," enter the following command:
echo xwin off > L:\system\program
ftp method
To end the session using ftp, create a second text file with the following
contents:
xwin off<cr>
The second text file is named "stopx". At an ftp command prompt, copy this
file from your local directory to a virtual file called "program" in the logic
analyzer \system directory as follows:
ftp> cd system
ftp> put stopx program
3-9
I