Table 10-1 Numeric Codes and Text Messages (continued)
Control panel message Description Recommended action
handles transference of information between
the system BIOS and ME rmware.
3. If the error still persists, replace the
system board.
2231-ME error during MEBx execution Error occurred during MEBx execution which
fails into “ME” grouping.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME rmware version.
3. If the error still persists, replace the
system board.
2232-AMT error during MEBx execution Error occurred during MEBx execution which
fails into “AMT” grouping.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME rmware version.
3. If the error still persists, replace the
system board.
2233-HECI error during MEBx execution Error occurred during MEBx execution which
fails into “MEI or HECI” grouping.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME rmware version.
3. If the error still persists, replace the
system board.
2239-ME image lock failure Special system congurations with reduced ME
rmware image require BIOS control of ME
rmware upgrading. A failure has occurred
after the ME rmware update process in which
the BIOS could not relock the ME rmware
region.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME rmware version.
3. If the error still persists, replace the
system board.
2240-ME image unlock failure Special system congurations with reduced ME
rmware image require BIOS control of ME
rmware upgrading. A failure has occurred prior
to the ME rmware update process in which the
BIOS could not unlock the ME rmware region.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME rmware version.
3. If the error still persists, replace the
system board.
Invalid Electronic Serial Number Electronic serial number is missing. Enter the correct serial number in Computer
Setup.
Network Server Mode Active and No Keyboard
Attached
Keyboard failure while Network Server Mode
enabled.
1. Reconnect keyboard with computer
turned o.
2. Check connector for bent or missing pins.
3. Ensure that none of the keys are
depressed.
4. Replace keyboard.
Parity Check 2 Parity RAM failure. Run Computer Setup and Diagnostic utilities.
108 Chapter 10 POST Error Messages