Table 5-5 Memory module descriptions and part numbers
Description Spare part number
4 GB L83673-005
8 GB L46598-005
8 GB (for use in the People's Republic of China) N77402-005
16 GB L67710-005
16 GB (for use in the People's Republic of China) N77403-005
Before removing a memory module, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 30).
2. Remove the rubber feet (see Rubber feet on page 30).
3. Remove the bottom cover (see Bottom cover on page 31).
4. Remove the battery (see Battery on page 32).
To remove a memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. The memory module tilts up.
2. Remove the memory module (2) by pulling it away from the slot at an angle.
To install a memory module, reverse this procedure.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
