43
Selecting Test Features
Setting Transmit Structured Payload/Test Signal (Options UKJ or 110)
Setting Transmit Structured Payload/
Test Signal (Options UKJ or 110)
Description Structured PDH Payload/Test Signal settings determine the SONET
payload or the PDH test signal to be tested and set any background (non
test) conditions to prevent alarms while testing. Fully structured DS1 or
DS3 payloads are only available if Option 110 is fitted.
TIP: If you wish to set the HP 37717C transmitter and receiver to the same
Payload settings, choose .
HOW TO: 1 Choose the required Test Signal rate. If N X 64 kb/s (or N x 56 kb/s
Option 110) is chosen, see "Setting Transmit N X 64 kb/s (N X 56 kb/
s) Structured Payload/Test Signal " page 48.
2 Choose the Framing pattern of the PAYLOAD.
If 2 Mb/s (or DS1 Option 110 instruments) TEST SIGNAL is chosen,
INSERT 2 Mb/s (or INSERT DS1) is added to the menu. See
"Inserting an External PDH Payload/Test Signal " page 52
3 Choose the test tributary within the structured payload under 34Mb,
8Mb, 2Mb, 64 kb ( (DS2, DS1, 56kb/s for Option 110 instruments).
OTHER
SETTINGS CONTROL
OUPLED
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
