Figure 4 HP 3PAR StoreServ 7400 Node:Slot:Port Legend
Table 1 describes the default port configurations for the HP 3PAR StoreServ 7000 and 7000c
Storage systems.
Table 1 Storage System Expansion Cards
Nodes 2 and 3Nodes 0 and 1Expansion cards
No expansion card1 FC HBA each2 FC HBAs only
No expansion card1 10 Gb/s CNA each2 10 Gb/s (CNA) only
1 10 Gb/s CNA each1 FC HBA each2 FC HBAs + 2 10 Gb/s CNAs
The following expansion cards are supported:
• 4–port 8Gb FC HBA
• 2–port 16Gb FC HBA
• 2–port 10Gb CNA
• 2–port 10Gb Ethernet NIC
• 4–port 1Gb Ethernet NIC
12 Identifying Storage System Components
To Next Page
Loading...
