HP 3PAR StoreServ 7000 - FC Port LEDs

Table 9 Description of Ethernet LEDs (continued)
Off – No link established or 10 Mb Link
On – No Link activityGreenActivity2
Off – No link established
Flashing – Link activity
FC Port LEDs
The controller node has two FC ports. Each FC port has two LEDs. The arrow-head shaped LEDs
point to the associated port.
Figure 19 Location of FC Port LEDs
Table 10 Description of FC Port LEDs
IndicatesLED AppearanceLEDPort
Wake up failure (dead device) or power is not appliedOffNo lightAll ports
Not connectedOffAmberFC-1
Connected at 4 Gbs3 fast blinks
Connected at 8 Gbs4 fast blinks
Normal/Connected – link upOnGreenFC-2
Link down or nor connectedFlashing
SAS Port LEDs
The controller node has two SAS ports. Each SAS port has four LEDs and numbered 0 to 3:
Figure 20 Location of SAS Port LEDs
Controller Node and Internal Component LEDs 23