HP 3PAR StoreServ 7000 - Cage Example 2; Cage Suggested Action 2

ps0 OK OK OK OK Low Low

ps1 Failed Failed Failed OK Low Low

-------------Drive Info-------------- --PortA-- --PortB--

Drive DeviceName State Temp(C) LoopState LoopState

0:0 5000c500720387e0 Normal 21 OK OK

1:0 5000c50072039188 Normal 21 OK OK

2:0 5000c500720387b0 Normal 21 OK OK

3:0 5000c500720395b4 Normal 21 OK OK

4:0 5000c50072036fbc Normal 21 OK OK

5:0 5000c50072039fc0 Normal 21 OK OK

6:0 5000c50072037250 Normal 22 OK OK

7:0 5000c5005737cc0c Normal 23 OK OK

cage Example 2

Component -------------Summary Description-------------- Qty

Cage Degraded or failed cage power supplies 2

Cage Degraded or failed cage AC power 1

Component -Identifier- ------------Detailed Description------------

Cage cage:1 Power supply 0 is Failed

Cage cage:1 Power supply 0's AC state is Failed

Cage cage:1 Power supply 2 is Off

cage Suggested Action 2

A cage power supply or power supply fan is failed, is missing input AC power, or the switch is

turned OFF. The showcage -d cageX and showalert commands provide more detail.

cli% showcage -d cage1

Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model FormFactor

1 cage1 1:0:1 1 0:0:1 1 8 21-23 402e 402e DCS2 SFF

-----------Cage detail info for cage1 ---------

Position: ---

Interface Board Info Card0 Card1

Firmware_status Current Current

Product_Rev 402e 402e

State(self,partner) OK,OK OK,OK

VendorId,ProductId HP,DCS2 HP,DCS2

Master_CPU Yes No

SAS_Addr 50050CC1178EA0BE 50050CC1178E6BBE

Link_Speed(DP1,DP2) 6.0Gbps,Unknown 6.0Gbps,Unknown

PS PSState ACState DCState Fan State Fan0_Speed Fan1_Speed