HP 3PAR StoreServ 7000 - Cage; Format of Possible Cage Exception Messages; Cage Example 1; Cage Suggested Action 1

cage
Displays drive cage conditions that are not optimal and reports exceptions if any of the following
do not have normal states:
• Ports
• SFP signal levels (RX power low and TX failure)
• Power supplies
• Cage firmware (is not current)
• Reports if a servicecage operation has been started and has not ended.
• Cages are supported for hardware platform
Format of Possible cage Exception Messages
Cage cage:<cageid> "Missing A loop" (or "Missing B loop")
Cage cage:<cageid>,mag:<magpos> "Magazine is <MAGSTATE>"
Cage cage:<cageid> "Power supply <X>'s fan is <FANSTATE>"
Cage cage:<cageid> "Power supply <X> is <PSSTATE>" (Degraded, Failed, Not_Present)
Cage cage:<cageid> "Power supply <X>'s AC state is <PSSTATE>"
Cage cage:<cageid> "Cage is in "servicing" mode (Hot-Plug LED may be illuminated)"
Cage cage:<cageid> "Firmware is not current"
Cage cage:<cageid> "Cage type <Model> is not supported on this platform"
Cage cage:<cageid> "Missing both A and B loops"
Cage cage:<cageid> "Cage state information is unavailable"
cage Example 1
Component -Summary Description- Qty
Cage Cages missing A loop 1
Component -Identifier- -Detailed Description--
Cage cage:1 Missing A loop
cage Suggested Action 1
Check the connection/path to the SFP in the cage and the level of signal the SFP is receiving. An
RX Power reading below 100 µW signals the RX Power Low condition; typical readings are between
300 and 400 µW. Helpful CLI commands are showcage -d and showcage -sfp ddm.
At least two connections are expected for drive cages, and this exception is flagged if that is not
the case.
cli% showcage -d cage1
Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model FormFactor
1 cage1 1:0:1 1 0:0:1 1 8 21-23 402e 402e DCS2 SFF
-----------Cage detail info for cage1 ---------
Position: ---
Interface Board Info Card0 Card1
Firmware_status Current Current
Product_Rev 402e 402e
State(self,partner) OK,OK OK,OK
VendorId,ProductId HP,DCS2 HP,DCS2
Master_CPU Yes No
SAS_Addr 50050CC1178EA0BE 50050CC1178E6BBE
Link_Speed(DP1,DP2) 6.0Gbps,Unknown 6.0Gbps,Unknown
PS PSState ACState DCState Fan State Fan0_Speed Fan1_Speed
Troubleshooting Storage System Components 39