HP 3PAR StoreServ 7000 - Converged Network Adapter Port LEDs

Figure 22 Location of Fibre Channel Adapter Port LEDs
Table 13 Description of Fibre Channel Adapter Port LEDs
IndicatesAppearanceLEDCallout
Off – Wake up failure (dead device) or power is not
applied
No lightAll ports
Off – Not connectedAmberPort speed1
3 fast blinks – Connected at 4 Gb/s.
4 fast blinks – Connected at 8 Gb/s.
On – Normal/Connected - link upGreenLink status2
Flashing – Link down or not connected
Converged Network Adapter Port LEDs
The CNA in the controller node includes two ports. Each port has a Link and Activity LED.
Figure 23 Location of CNA Port LEDs
Table 14 Description of CNA Port LEDs
IndicatesAppearanceLEDCallout
Off – Link downGreenLink1
On – Link up
Off – No activityGreenACT (Activity)2
On – Activity
Controller Node and Internal Component LEDs 25