Detailed status is as follows:
2010-10-22 10:35:36 PDT Created task.
2010-10-22 10:35:36 PDT Updated Executing "upgradecage -a -f" as 0:12109
2010-10-22 10:35:36 PDT Errored upgradecage: Invalid option: -f
vlun
• Displays inactive Virtual LUNs (VLUNs) and those which have not been reported by the host
agent
• Reports VLUNs that have been configured but are not currently being exported to hosts or
host-ports
• Displays when too many VLUNs have been created
Format of Possible vlun Exception Messages
vlun vlun:(<vvID>, <lunID>, <hostname>)"Path to <wwn> is not is not seen by host" vlun
vlun:(<vvID>, <lunID>, <hostname>) "Path to <wwn> is failed"
vlun host:<hostname> "Host <ident>(<type>):<connection> is not connected to a port"
vlun -- "<count> active VLUNs exceeds the supported limit of <max count>"
vlun Example
Component ---------Summary Description--------- Qty
vlun Hosts not connected to a port 1
Component -----Identifier----- ---------Detailed Description--------
vlun host:cs-wintec-test1 Host wwn:10000000C964121D is not connected to a port
vlun Suggested Action
Check the export status and port status for the VLUN and HOST with CLI commands such as
showvlun, showvlun -pathsum, showhost, showhost pathsum, showport, servicehost
list, etc. For example:
cli% showvlun -host cs-wintec-test1
Active VLUNs
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121C 2:5:1 host
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 ---------------- --- host
cli% showhost cs-wintec-test1
Id Name Persona -WWN/iSCSI_Name- Port
0 cs-wintec-test1 Generic 10000000C964121D ---
10000000C964121C 2:5:1
cli% servicehost list
HostName -WWN/iSCSI_Name- Port
host0 10000000C98EC67A 1:1:2
host1 210100E08B289350 0:5:2
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121D 3:5:1 unknown
Troubleshooting Storage System Components 65
To Next Page
Loading...
