file Suggested Action 3
This condition might be transient because the Service Processor retrieves the files and cleans up
the dump directory. If the SP is not gathering the dump files, check the condition and state of the
SP.
file Example 4
Component ------Summary Description------- Qty
License An online upgrade is in progress 1
Component -Identifier- ------Detailed Description------
File -- An online upgrade is in progress
file Suggested Action 4
Use the CLI upgradesys -status command to determine the status of the online upgrade in
progress. Use the CLI upgradesys -node <nodeID> command to reboot the next node shown
in the status or the CLI upgradesys -finish command to complete the upgrade after all nodes
have been rebooted to the new version of software. Be very careful with aborting or reverting an
offline upgrade. Contact HP support to request support for aborting or reverting the upgrade of
your system. See “Contacting HP Support about System Setup” (page 73).
fs
Displays File Services health and checks the following File Services items:
• Check the health of File Services and the failover/health of each Storage Pool
• Check the health of each Virtual File Server
• Check the health of the node IP Addresses for File Services
• Check the health of the File Services gateway
Format of Possible fs Exception Messages
fs fpg "<error text>"
fs <poolname> "<poolname> is degraded: Failed over from <primaryowner> to <currentowner>"
fs <poolname> "<poolname>: <associatedMessage>. Corrective Action: <correctiveAction>
fs vfs "<error text>"
fs <server> "IP address failed to activate"
fs <server> "Missing fsip for VFS"
fs <server> "Missing cert for VFS"
fs fshareobj "<error text>"
fs <sharename> "<fpg/vfs/store/sharename>: <associatedMessage>. Corrective Action: <correctiveAction>"
fs nodeip "<error text>"
fs <nodeaddr> "<nodecuid:nodeaddr>: <associatedMessage>. Corrective Action: <correctiveAction>"
fs gw "<error text>"
fs <gatewayaddr> "<gatewayaddr>: <associatedMessage>"
fs dns "<error text>"
fs <dnssuffixlist> "<dnsaddresslist>: <associatedMessage>"
fs Example
Component ---------Summary Description----------- Qty
fs File Services provisioning group issues 1
Component -Identifier- -------------------Detailed Description--------------------
fs fsp2 fsp2: FPG is not activated. Corrective Action: Activate FPG
fs Suggested Action
Use the CLI showfpg command to determine the state of the listed FPG. Use the CLI setfpg and
setfpg -activate commands to start the listed FPG or the CLI removefpg command to remove
46 Troubleshooting
To Next Page
Loading...
