HP 50G User Manual

Page 1-19
Selecting properties of the Stack
First, press the H button to activate the CALCULATOR MODES input
form. Within the CALCULATOR MODES input form, press the @@DISP@ soft
menu key (
D) to display the DISPLAY MODES input form. Press the
down arrow key,
˜, twice, to get to the Stack line. This line shows two
properties that can be modified. When these properties are selected
(checked) the following effects are activated:
To illustrate these settings, either in algebraic or RPN mode, use the
equation writer to type the following definite integral:
‚O…Á0™„虄¸\x™x`
In Algebraic mode, the following screen shows the result of these keystrokes
with neither _Small nor _Textbook are selected:
With the _Small option selected only, the display looks as shown below:
With the _Textbook option selected (default value), regardless of whether
the _Small option is selected or not, the display shows the following result:
_Small Changes font size to small. This maximizes the amount of
information displayed on the screen. Note, this selection
overrides the font selection for the stack display.
_Textbook Displays mathematical expressions in graphical
mathematical notation
SG49A.book Page 19 Friday, September 16, 2005 1:31 PM

HP 50G Specifications

General

Digits	33 digits
Battery type	CR2032
Type	Scientific
Form factor	Pocket

Weight and Dimensions

Weight	220 g
Dimensions (WxDxH)	87 x 184 x 23.5 mm