HP 50G User Manual

Page 3-7
Finally, in order to select, for example, the hyperbolic tangent (tanh)
function, simply press @@TANH@.
For example, to calculate tanh(2.5), in the ALG mode, when using SOFT
menus over CHOOSE boxes, follow this procedure:
„´@@HYP@ @@TANH@ 2.5`
In RPN mode, the same value is calculated using:
2.5`„´)@@HYP@ @@TANH@
As an exercise of applications of hyperbolic functions, verify the following
values:
Operations with units
Numbers in the calculator can have units associated with them. Thus, it is
possible to calculate results involving a consistent system of units and
produce a result with the appropriate combination of units.
The UNITS menu
The units menu is launched by the keystroke combination
‚Û(associated with the 6 key). With system flag 117 set to
CHOOSE boxes, the result is the following menu:
NOTE: To see additional options in these soft menus, press the L
key or the „«keystroke sequence.
SINH (2.5) = 6.05020.. ASINH(2.0) = 1.4436…
COSH (2.5) = 6.13228.. ACOSH (2.0) = 1.3169…
TANH(2.5) = 0.98661.. ATANH(0.2) = 0.2027…
EXPM(2.0) = 6.38905…. LNP1(1.0) = 0.69314….
SG49A.book Page 7 Friday, September 16, 2005 1:31 PM

HP 50G Specifications

General

Digits	33 digits
Battery type	CR2032
Type	Scientific
Form factor	Pocket

Weight and Dimensions

Weight	220 g
Dimensions (WxDxH)	87 x 184 x 23.5 mm