HP 5334B - Page 64

Table 4-4. HP-ZB Operational Verification
Program Listing (Continued)
4
4600 DISP "The 5334A/B will now be pro- grammed for POSITIVE eycternal"
4610 DISP "start and stop arm."
4620 DISP
4630 DISP "Press EXT ARM SELECT to verify
thls."
4640 REMOTE A
4650 OUTPUT A ;"XAl X01"
4660 LOCAL A
4670 DISP
4680 OISP
8$
4690 PAUSE
4708 CLEAR
4710 DISP "Lastly, the 5334A wlll be pro- grammed for NEGATIVE external"
4720 DISP "start and stop arm slopes."
4730 DISP
4-740 DISP "Press EKT ARM SELECT to verify this."
4750 REMOTE
A
4760 OUTPUT A ;"Xfi3 XO3"
4770 LOCAL A
4780 DISP
4790 DISP
B$
4800 PAUSE
4810 CLEAR
4820
GOSUB 7960
4830
!
4840 ! CHECKPOINT 9
4850
I$=" Math Function Test"
4860
S=9
4870 GOSUB 781 0
4880 R=l
4890 DISP
E$;"math offset"
4900 DISP "and normalize constants
will be"
4910 DISP "entered in the
5334A/B. The OFS"
4920 OISP "and NML indicators on the"
4330 DISP
"5334A/B front panel wlll llght."
4940 GOSUB 8490
4950 REMOTE
A
4960 OUTPUT A ;"IN "
4970 OUTPUT A ;"MD0 MN3.55 M02.0"
4980 WAIT 1003
4990 LOCHL
A
5000 CLEAR
5016 DISP "Verify OFS and NML indicators are lit."
5028 DISP
5030 DISF "To check that the constants are"
5040 DISP "entered, press the
SELECT/ENTERU
5050 DISP "key, and verify that the 5334A/EiN
5060 DISP "front panel reads 'Z.0'."
5070 DISP
5080 DISP "Press the
SELECT/ENTER key"
5090 DISP "again. The display should read"
5100
DISP "'3.55'."
51 10 OISP
HP 5334B - Service Manual
4-54