HP 5334B - 5-18. MULTIPLE-REGISTER COUNTER (MRC) INPUT ADJUSTMENT, CH A

-
--
NOTE
Do not adjust AIR133 to a level above 8 mV rms. If the setting is made at
8 mV rrns and the 53348 still counts at 4 mV rms, a problem exists in the
Input Amplifier circuitry.
5-18. MULTIPLE-REGISTER COUNTER (MRC) INPUT ADJUSTMENT, CH A
Reference: Figure 8-20
Description: The Channel A DC biasing level on the MRC input signal is optimized at two frequencies on both
the positive and negative slopes of the signal (interactive adjustment).
Figrre 5-8. MRC Ir~put AdjusflCl~artnel A Setup
f
HP8656B
SIGNAL GENERATOR
TIMEBASE IN
Equipment:
Signal Generator ............................. HP 8656B
HP5334B
UNIVERSAL COUNTER TIMEBASE OUT
Procedure:
B-1
O " ~~Io~IR
-
1. Set the Signal Generator as follows:
Frequency
......................................... 70 MHz
Amplitude ........................................ 28.0 mV +- 0.3 mV
A mr
OUTPUT
\ 2
TS22-L2
HP 5334B - Scrvicc Manual
5-13