HP 5334B - 4-35. PULSE WIDTH A TEST

4-35. PULSE WIDTH A TEST
Specification: Refer to Table 1-1, HP Model 5334B Specifications, for Pulse Width A specifications.
Description: A pulse width is generated and then measured with the HP 5334B to verify the Counter's perfor-
mance.
I
Figure 4-9. Pulse Width A Test Setup
P \
Equipment:
Signal Generator ................................................................................................... HP 8660AIC
HP5334B
UNIVERSAL COUNTER
Procedure:
1.
Set the signal generator as follows:
Frequency
............................................................................................................... 100 MHz
Amplitude .............................................................................................................. 200 mV rms
Q
rr
J
HP8660A/C/D
SIGNAL GENERATOR
2. Set the HP 5334B as follows:
REF OUT
Reinitialize the 5334B.
FUNCTION ........................................................................................................... PULSE WIDTH A
'
HP 5334B - Se~ce Manual
4-26