HP A5830 Series Command Reference

96
MSTI RootPortId :0.0
MSTI Root Type :PRIMARY root
Master Bridge :32768.000f-e23e-9ca4
Cost to Master :0
TC received :0
# In PVST mode, display the spanning tree status and statistics of all VLANs on all ports.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] display stp
-------[VLAN 1 Global Info]-------
Protocol Status :enabled
Bridge ID :32768.000f-e200-2200
Bridge Times :Hello 2s MaxAge 20s FwDly 15s
Root ID / RPC :0.00e0-fc0e-6554 / 200200
Root PortId :128.48
BPDU-Protection :disabled
TC or TCN received :2
Time since last TC :0 days 0h:5m:42s
----[Port1(GigabitEthernet1/0/1)][FORWARDING]----
Port Protocol :enabled
Port Role :Designated Port
Port Priority :128
Port Cost(Legacy) :Config=auto / Active=200
Desg. Bridge/Port :32768.000f-e200-2200 / 128.2
Port Edged :Config=disabled / Active=disabled
Point-to-point :Config=auto / Active=true
Transmit Limit :10 packets/hello-time
Protection Type :None
Rapid transition :false
PortTimes :Hello 2s MaxAge 20s FwDly 15s MsgAge 2s
BPDU Sent :186
TCN: 0, Config: 0, RST: 0
BPDU Received :0
TCN: 0, Config: 0, RST: 0, MST: 0
-------[VLAN 2 Global Info]-------
Protocol Status :enabled
Bridge ID :32768.000f-e200-2200
Bridge Times :Hello 2s MaxAge 20s FwDly 15s
Root ID / RPC :0.00e0-fc0e-6554 / 200200
Root PortId :128.48
BPDU-Protection :disabled
TC or TCN received :2
Time since last TC :0 days 0h:5m:42s
# Display the spanning tree status and statistics when the spanning tree feature is disabled.
<Sysname> display stp

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English