71
Table 18 Command output
LACP state flags:
A—LACP is enabled
B—Indicates the LACP short timeout
C—Sending system detects that the link is aggregatable
D—Sending system detects that the link is synchronized
E—Sending system detects that the incoming frames are collected
F—Sending system detects that the outgoing frames are distributed
G—Sending system receives frames in the default state
H—Sending system receives frames in the expired state
Aggregate interface to which the member port belongs
Information about the local end
Aggregation priority of the port
Information about the remote end
The remote end system ID, comprising the system LACP priority and the system
MAC address
Total number of LACP packets received
Total number of illegal packets
Total number of LACP packets sent
display link-aggregation summary
Description
Use the display link-aggregation summary command to display the summary information for all
aggregation groups.
The information about the remote system for a static link aggregation group may be displayed as none or
may not be displayed because the aggregation group is not aware of the partner’s information.
Syntax
display link-aggregation summary [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
To Next Page
Loading...
Need help?
General