155
View
Any view
Default level
1: Monitor level
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface PVID VLAN passing
GE1/0/4 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface PVID VLAN passing
GE1/0/8 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Table 35 Command output
VLANs for which the port allows packets to pass through
VLANs for which the port sends packets without removing VLAN tags
VLANs for which the port sends packets after removing VLAN tags
port
Description
Use the port command to assign the specified access ports to the VLAN.
To Next Page
Loading...
Need help?
General