HP A5830 Series Command Reference

35
port auto-power-down
Description
Use the port auto-power-down command to enable auto power-down on Ethernet interfaces for energy
efficiency.
Use the undo port auto-power-down to restore the default.
By default, auto power-down is disabled on Ethernet interfaces.
Syntax
port auto-power-down
undo port auto-power-down
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Examples
# Enable auto power-down on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port auto-power-down
# Enable auto power-down on all member ports of port group group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member gigabitethernet 1/0/1
[Sysname-port-group-manual-group1] group-member gigabitethernet 1/0/2
[Sysname-port-group-manual-group1] port auto-power-down
port-group manual
Description
Use the port-group manual command to create a port group and enter port group view.
Use the undo port-group manual command to remove a port group.
By default, no port group exists.
Syntax
port-group manual port-group-name
undo port-group manual port-group-name
View
System view

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English