229
[Sysname-GigabitEthernet1/0/1] lldp notification remote-change enable
lldp timer notification-interval
Description
Use the lldp timer notification-interval command to set the LLDP trap transmit interval.
Use the undo lldp timer notification-interval command to restore the default.
By default, the LLDP trap transmit interval is 5 seconds.
Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
View
System view
Default level
2: System level
Parameter
interval: Sets the LLDP trap transmit interval, ranging from 5 to 3600 seconds.
Example
# Set the LLDP trap transmit interval to 8 seconds.
<Sysname> system-view
[Sysname] lldp timer notification-interval 8
lldp timer reinit-delay
Description
Use the lldp timer reinit-delay command to set the LLDP re-initialization delay.
Use the undo lldp timer reinit-delay command to restore the default.
By default, the LLDP re-initialization delay is 2 seconds.
Syntax
lldp timer reinit-delay delay
undo lldp timer reinit-delay
View
System view
Default level
2: System level
Parameter
delay: Sets the LLDP re-initialization delay, ranging from 1 to 10 seconds.
To Next Page
Loading...
