HP A5830 Series

218
Field
Description
Port available power value
Available PoE power on PSE ports, or power needed on PD ports,
in watts
TLV type
Unknown basic TLV type
TLV information
Information contained in the unknown basic TLV type
Unknown organizationally-defined
TLV
Unknown organizationally specific TLV
TLV OUI
OUI of the unknown organizationally specific TLV
TLV subtype
Unknown organizationally specific TLV subtype
Index
Unknown organization index
TLV information
Information contained in unknown organizationally specific TLV
Local Interface
Local port that receives the LLDP information
display lldp statistics
Description
Use the display lldp statistics command to display the global LLDP statistics or the LLDP statistics of a port.
If no keyword or parameter is specified, this command displays the global LLDP statistics as well as the
LLDP statistics of all ports.
Syntax
display lldp statistics [ global | interface interface-type interface-number ] [ | { begin | exclude | include
} regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
global: Displays the global LLDP statistics.
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the global LLDP statistics as well as the LLDP statistics of all ports.
<Sysname> display lldp statistics