HP A5830 Series Command Reference

217
Field
Description
PSE power supported
Indicates whether the device can operate as a PSE
PSE power enabled
Indicates whether the device is operating as a PSE
PSE pairs control ability
Indicates whether the PSE-PD pair control is available
Power pairs
PoE mode:
Signal—PoE via signal lines
Spare—PoE via spare lines
Port power classification
Port power classification of the PD:
Class 0
Class 1
Class 2
Class 3
Class 4
Link aggregation supported
Indicates whether link aggregation is supported
Link aggregation enabled
Indicates whether link aggregation is enabled
Aggregation port ID
Aggregation group ID, which is 0 when link aggregation is
disabled
Location format
Location information format:
Invalid—The format of the location information is invalid
Coordinate-based LCI—The location information is coordinate-
based
Civic Address LCI—Typical address information
ECS ELIN—Telephone for urgencies
PoE PSE power source
PSE power type:
Unknown—Unknown power supply
Primary—Primary power supply
Backup—Backup power supply
PoE PD power source
PD power type:
Unknown—Unknown power supply
PSE—PSE power supply
Local—Local power supply
PSE and local—PSE and local power supplies
Port PSE Priority
PoE power supply priority of PSE ports:
Unknown
Critical
High
Low
Port PD Priority
PoE power receiving priority of PD ports:
Unknown
Critical
High
Low

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English