HP A5830 Series

108
Revision level :0
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance Vlans Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
# In PVST mode, display the effective MST region configuration information.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] display stp region-configuration
Oper Configuration
Format selector :0
Region name :hello
Revision level :0
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance Mode Vlans Mapped
0 default 3 to 4094
1 static 1
2 dynamic 2
Table 30 Command output
Field
Description
Format selector
Format selector defined by the spanning tree protocol. The default value is
0 and the selector cannot be configured.
Region name
MST region name.
Revision level
Revision level of the MST region, which can be configured by using the
revision-level command and defaults to 0.
Mode
MSTI mode:
Default—Default instance MSTI 0. In PVST mode, the spanning tree
feature is disabled.
Static—Static MSTI.
Dynamic—Dynamically-assigned MSTI, which only exists in PVST mode.
display stp root
Description
Use the display stp root command to display the root bridge information of all MSTIs.
Syntax
display stp root [ | { begin | exclude | include } regular-expression ]
View
Any view