HP A5830 Series Command Reference

77
[Sysname-Bridge-Aggregation1]
lacp period short
Description
Use the lacp period short command to set the LACP timeout interval on a port to the short timeout interval
(1 second).
Use the undo lacp period command to restore the default setting.
The default LACP timeout interval is the long timeout interval (30 seconds).
Syntax
lacp period short
undo lacp period
View
Ethernet interface view
Default level
2: System level
Parameters
None
Example
# Set the LACP timeout interval on GigabitEthernet 1/0/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lacp period short
lacp system-priority
Description
Use the lacp system-priority command to set the LACP priority of the local system.
Use the undo lacp system-priority command to restore the default setting.
By default, the system LACP priority is 32,768.
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default level
2: System level

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English