HP A5830 Series

106
Time : 2009/02/08 00:22:56
Port priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
# In PVST mode, display the historical port role calculation information of IRF member switch 1 in VLAN
2.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] display stp vlan 2 history slot 1
--------------- STP slot 1 history trace ---------------
------------------- VLAN 2 ---------------------
Port GigabitEthernet1/0/1
Role change : ROOT->DESI (Aged)
Time : 2009/02/08 00:22:56
Port priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.1
Port GigabitEthernet1/0/2
Role change : ALTER->ROOT
Time : 2009/02/08 00:22:56
Port priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
Table 28 Command output
Field
Description
Port
Port name
Role change
A role change of the port (―Age‖ means that the change was caused by
expiration of the received configuration BPDU)
Time
Time of port role calculation
Port priority
Port priority
display stp ignored-vlan
Description
Use the display stp ignored-vlan command to display VLAN Ignore-enabled VLANs.
Syntax
display stp ignored-vlan [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.