HP A5830 Series

70
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed link aggregation information for GigabitEthernet 1/0/1, a member port of a static
aggregation group.
<Sysname>display link-aggregation member-port GigabitEthernet 1/0/1
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
GigabitEthernet1/0/1:
Aggregation Interface: Route-Aggregation1
Port Number: 3
Port Priority: 32768
Oper-Key: 2
# Display detailed link aggregation information for GigabitEthernet 1/0/2, a member port of a dynamic
aggregation group.
<Sysname>display link-aggregation member-port GigabitEthernet 1/0/2
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
GigabitEthernet1/0/2:
Aggregation Interface: Bridge-Aggregation2
Local:
Port Number: 7
Port Priority: 32768
Oper-Key: 3
Flag: {ACG}
Remote:
System ID: 0x8000, 0000-0000-0000
Port Number: 0
Port Priority: 32768
Oper-Key: 0
Flag: {EF}
Received LACP Packets: 0 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)