HP Access Control - HP Digital Sender 9250 C; Figure 1-5 External USB Port - HP CM8050;CM8060 Color MFP; Figure 1-6 External USB Port - HP Digital Sender 9250 C

3. Connect the card reader to the USB port.
Figure 1-5 External USB port — HP CM8050/CM8060 Color MFP
4. Turn on the power to the device.
HP Digital Sender 9250c
To install the USB card reader to an external USB port on the HP Digital Sender 9250c, complete the
following steps:
1. Turn off the power to the device.
2. Locate the type A female USB port on the back of the device.
3. Connect the card reader to the USB port.
Figure 1-6 External USB port — HP Digital Sender 9250c
4. Turn on the power to the device.
8 Chapter 1 External USB card readers ENWW