Table 9 Port LEDs and Mode Behavior (continued)
MeaningState/ModeFunctionSwitch LEDs
The corresponding port has
failed its self-test. Flashes
Slow Flash Orange*
simultaneously with the
Global Status LED flashing
orange.
The Port is disabled, not
connected, or not receiving
link.
Off
The port is operating at 40
Gbps.
Fast Flash Green**Port LEDs are displaying
the connection speed at
Speed Mode Selected
which each port is
operating.
The port is operating at 10
Gbps.
On Green
The port is operating at 5
Gbps. (HPE SMART RATE
ports only)
Triple Blink Green
The port is operating at 2.5
Gbps. (HPE SMART RATE
ports only)
Double Blink Green
The port is operating at 1
Gbps.
Slow Flash Green*
The port is not Linked, or is
operating at 10 or 100
Mbps.
Off
The port is providing PoE
power.
On GreenPort LEDs are displaying
PoE information.
PoE Mode Selected
PoE is disabled on the port.On Orange
The port is denied power or
is detecting an external PD
fault.
Fast Flash Orange**
The port has an internal
hardware failure. Flashes
Slow Flash Orange*
simultaneously with the
Global Status LED flashing
orange.
The port is not providing
PoE power.
Off
Stack Member exists in the
stack and is operational.
On GreenMode currently active only
in stacked configurations.
User Mode Selected
Used to display the number
of members in a stack and
their current status.
Indicates the Member # of
the chassis.
Slow Flash Green*
Indicates the Member # of
the Commander of the
stack.
Fast Flash Green**
The status information is
sticky and if a unit’s status
changes while in USER
mode, you must exit and
Stack Member is currently
booting or has a fault that is
On Orange
re-enter USER mode to get
the updated status.
preventing it from
communicating.
16 Introducing the 3810M switches
To Next Page
Loading...
