HP G2 Series User Manual

10. Attach the switch to the rack using the screws provided.
The light switch can be mounted anywhere that there is available free space along the vertical frame member.
11.
Using the appropriate power cord, plug the unit into a power source.
12. Be sure that the LED light is in the "on" position. The switch automatically powers on the LED light when the rack door is
opened. The switch also powers o the LED light when the rack door is closed.
LED light kit
51

HP G2 Series Specifications

General

Category	Measuring Instruments
Series	G2
Measurement Range	Varies by model
Accuracy	Varies by model
Resolution	Varies by model
Display	Varies by model
Input Impedance	Varies by model
Operating Temperature	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Weight	Varies by model