HP G2 Series User Manual

Procedure
1. Hold the flat side of the left rail with fixed brackets facing toward you.
2. Place the sliding rail on top of the left rail with fixed brackets.
3. Extend the inner slides of the sliding rail until the screw holes on the sliding rail and the left rail with fixed brackets are
aligned. Gently push down on the sliding rail to lock it into place.
4. Secure the rails together with two M4 x 12 flat HD screws and M4 external washers.
5.
Repeat steps 1 through 4 for the right rail with fixed brackets.
Installing the sliding shelf rail assemblies
Before installing the sliding shelf, use the following steps to install the sliding shelf rail assemblies into the rack.
100 Kilo Sliding Shelf kit
59

HP G2 Series Specifications

General

Category	Measuring Instruments
Series	G2
Measurement Range	Varies by model
Accuracy	Varies by model
Resolution	Varies by model
Display	Varies by model
Input Impedance	Varies by model
Operating Temperature	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Weight	Varies by model