HP G2 Series User Manual

Installing the floor gasket
Procedure
1. Depending on the size of your rack, cut the floor gasket at the perforation to reduce the length from 800-mm (31 in) to
600-mm (24 in).
2.
Remove the protective tape from the bottom edge of the floor gasket, and apply the gasket to the bottom of the rack with
the adhesive strip facing the front of the rack.
Airflow Optimization kit
13

HP G2 Series Specifications

General

Category	Measuring Instruments
Series	G2
Measurement Range	Varies by model
Accuracy	Varies by model
Resolution	Varies by model
Display	Varies by model
Input Impedance	Varies by model
Operating Temperature	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Weight	Varies by model